The nomenclature is divided into two sections:
- microtechnology subcontracting
- production technologies, trading and service providers
2018 Catalogue by sector
2020 catalogue online at a later stage
Machine tools and equipment
Conventional machine tools with stamping tools
2A0005 |
Turning and milling centres (22) |
2A0010 |
Machining centres (with exchange of dies) (33) |
2A0015 |
Numerically controlled milling machines (25) |
2A0020 |
Knee and column milling machines (horizontal or vertical) (1) |
2A0025 |
Copying milling machines (1) |
2A0030 |
Tool milling machines (6) |
2A0035 |
Tapping machines (5) |
2A0040 |
PCB machining machines (2) |
2A0045 |
Drilling machines (3) |
2A0050 |
Sawing machines (5) |
2A0055 |
Numerically controlled lathes (25) |
2A0060 |
Turning lathes (11) |
2A0065 |
Toolmaker's lathes (7) |
2A0070 |
Parallel turning and threading lathes (6) |
2A0075 |
Machining units (drilling, milling, trimming, sawing) (6) |
2A0080 |
Gear hobbing machines (1) |
Conventional abrasion machine tools
2B0005 |
Drill bit grinding machines |
2B0010 |
Milling tool grinding machines |
2B0015 |
Lathe tool grinding machines (1) |
2B0020 |
Universal grinding machines (2) |
2B0025 |
Abrasion polishing and deburring machines (vibration tumbling) (8) |
2B0030 |
Abrasion polishing machines |
2B0035 |
Numerically controlled grinding machines (11) |
2B0040 |
Cylindrical grinding machines (inner and outer) (8) |
2B0045 |
Surface grinding machines (9) |
2B0050 |
Cylindrical lapping machines (2) |
Non-conventional metal removing machines
2C0005 |
Laser-marking machines (20) |
2C0010 |
Etching machining machines (13) |
2C0015 |
Continuous laser machining machines (10) |
2C0020 |
Pulse laser machining machines (9) |
2C0025 |
Wire EDM machines (9) |
2C0030 |
EDM machines with tool magazines (5) |
2C0035 |
Die sinking EDM machines (6) |
2C0040 |
High precision abrasive waterjet cutting machines (1) |
Machine tools for sheet metal working
2D0005 |
Automatic sheet working lines (4) |
2D0010 |
Shearing lines (automatic and numerically controlled shearing) (2) |
2D0015 |
Punching lines (3) |
2D0020 |
Sheet planishing machines (3) |
2D0025 |
Slitting machines (1) |
2D0035 |
Numerically controlled punching machines (1) |
2D0040 |
High-speed presses (3) |
2D0045 |
Arch frame or column type presses (2) |
2D0050 |
Open-front presses (2) |
2D0055 |
Drawing presses (hydraulic) (1) |
2D0060 |
Drawing presses (mechanical) (3) |
2D0065 |
Revolving table presses |
2D0070 |
Wire and strip bending presses (1) |
2D0075 |
Pneumatic and hydro-pneumatic presses (4) |
2D0085 |
Punching units (2) |
Machine tools for injection
2E0005 |
Plastic injection presses (1) |
2E0010 |
Injection presses for metals under pressure (1) |
2E0015 |
Thermocompression presses |
2E0020 |
Low-pressure injection systems (2) |
2E0105 |
Accessories for injection machines (2) |
2F0005 |
Special machines for automation and assembly (14) |
2F0105 |
Flexible assembly cells (9) |
2F0110 |
Wire-guided trucks (1) |
2F0120 |
Gluing machines (7) |
2F0125 |
Welding machines (8) |
2F0130 |
Screwdriving machines (1) |
2F0135 |
Assembly machines (9) |
2F0140 |
Automatic assembly machines (17) |
2F0145 |
Assembly micromachines (10) |
2F0150 |
Industrial robots (27) |
2F0155 |
Free transfers (1) |
2F0160 |
Linear transfers (6) |
2F0165 |
Rotary transfers (5) |
2G0005 |
Measuring and inspecting machines, instruments and equipment (20) |
2G0105 |
Optical alignment (6) |
2G0110 |
Temperature measurement equipment (2) |
2G0115 |
Dimensional metrology equipment (42) |
2G0120 |
Electrical / electronic / magnetic metrology equipment (7) |
2G0125 |
Testing systems (4) |
2G0130 |
Dimension visualisation equipment (10) |
2G0135 |
Three-dimensional measuring machines (23) |
2G0140 |
Non-destructive testing machines and equipment (16) |
2G0145 |
Profile projectors and optical measuring machines (27) |
2H0005 |
Thermo-chemical treatment machines and equipment (ovens) (2) |
Surface treatment machines
2I0005 |
Electrolysis baths (7) |
2I0010 |
Cleaning machines (pickling, degreasing) (14) |
2I0015 |
Plasma cleaning (8) |
2I0020 |
Dust removal - antistatic (2) |
2I0025 |
Ultrasonic cleaning (8) |
Other equipment
2J0005 |
Soundproofing booths and equipment |
2J0010 |
Air compressors (5) |
2J0015 |
Equipment for workstation environment (7) |
2J0020 |
Equipment for the environment and water treatment (9) |
2J0025 |
Centrifuges for parts, chips, stamping liquid (4) |
2J0030 |
Machines and materials for packing and packaging (4) |
2J0035 |
Induction heating machine or equipment (3) |
Trade and industrial supplies
Accessories for tools (stamping/moulding)
2K0005 |
Accessories for tools (stamping) (3) |
2K0010 |
Accessories for tools (moulding) (1) |
2K0105 |
Accessories for column type units: punches, dies etc. (5) |
2K0110 |
Units with plain columns and plates (2) |
2K0115 |
Standard components for moulds (1) |
2K0120 |
Standard components for stamping/forming tools (5) |
2K0130 |
Tool measuring and counting systems (1) |
2K0135 |
Guiding systems for tools and moulds (1) |
2K0145 |
Automatic insertion and/or crimping units |
2K0150 |
Cylinders, springs (5) |
Components and modules
2L0005 |
Micromechanical components and modules (4) |
2L0105 |
Clamping units (7) |
2L0110 |
Standard components (screws, pins etc.) (5) |
2L0115 |
Counting systems (1) |
2L0120 |
Special screwing systems (1) |
2L0125 |
Guiding elements (9) |
2L0130 |
Fasteners and Fastone (1) |
2L0205 |
Microelectronic components and modules |
2L0305 |
Electronic actuators (2) |
2L0310 |
Electronic sensors (4) |
2L0320 |
Electronic connectors (4) |
2L0325 |
Brazing/soldering equipment (3) |
2L0345 |
Electrical motors (9) |
2L0355 |
Electric sequencers |
2L0405 |
Optical components and modules (4) |
2L0505 |
Optical actuators (1) |
2L0515 |
Optical benches (3) |
2L0520 |
Optical sensors, receivers, transmitters (4) |
2L0525 |
Optical encoders (2) |
2L0530 |
Optical fibres (4) |
2L0605 |
Pneumatic and hydraulic components and modules (4) |
2L0710 |
Connectors unions (1) |
2L0735 |
Tubes and other accessories (2) |
Equipment and tooling
2M0005 |
Machines accessories (6) |
2M0105 |
Automatic feed systems, distributors for presses and shears (6) |
2M0110 |
Vibration absorbers (2) |
2M0115 |
Gas cleaning equipment / wet vacuums (7) |
2M0120 |
Automatic loading and unloading arms (3) |
2M0125 |
Automatic loaders, vibration systems (3) |
2M0130 |
Decoilers for wires and strips (5) |
2M0135 |
Single and multiple-spindle tapping systems (1) |
2M0140 |
Feeding and ejection systems (1) |
2M0145 |
Greasing and lubrication systems (8) |
2M0150 |
Protective and safety systems |
2M0155 |
Grinding systems (3) |
2M0160 |
Volumetric metering systems (7) |
2M0165 |
Winding, unwinding, straightening equipment (5) |
2M0170 |
Numerical control equipment (6) |
2M0180 |
Miscellaneous expansion mandrels (8) |
2M0185 |
Machining assemblies and templates (4) |
2M0195 |
Pneumatic circular tables (1) |
2M0200 |
Dividing tables, indexing tables (5) |
2M0210 |
Magnetic tables (2) |
2M0225 |
Remonte-copeaux et pièces magnétisables |
2M0230 |
Boring, grinding, surfacing heads (8) |
2M0235 |
Drawing and stamping transfer systems (1) |
2M0240 |
Part sorting with bowl feeders (2) |
2M0305 |
Cutting tools (14) |
2M0410 |
Grinding instruments and abrasive bands (8) |
2M0420 |
Threading tools (20) |
2M0425 |
Milling tools (27) |
2M0430 |
Drilling tools (26) |
2M0440 |
Trimming tools (16) |
2M0445 |
Turning tools (22) |
2M0450 |
High-speed machining tools (26) |
2M0455 |
Plastic packaging for cutting tools or mechanical parts (2) |
2M0605 |
Electrodes (for EDM) (7) |
2M0610 |
Wires (for EDM) (6) |
2M0615 |
Parts supports (for EDM) (4) |
2M0620 |
Electrode holding systems (for EDM) (3) |
2M0625 |
Parts transfer systems (for EDM) (2) |
Robotics and automation peripherals
2M0705 |
Robot accessories (18) |
2M0710 |
Accessories for industrial data processing (6) |
2M0715 |
Driving and transfer modules (3) |
2M0720 |
Computers, calculators and PLCs (8) |
Materials and semi-worked products
2N0005 |
Industrial glues (10) |
2N0010 |
Mouldings, castings, sinterings (5) |
2N0015 |
Composite materials (3) |
2N0020 |
Consumable materials (lubricants, stamping fluid, treatment chemicals etc.) (21) |
2N0025 |
Low pressure plastics, bi-components |
2N0030 |
Raw materials and semi-worked products for stamping and drawing applications (20) |
2N0035 |
Raw materials and semi-worked products for plastics technology applications (5) |
2N0040 |
Nanomaterials / nanopowders (4) |
2N0050 |
Technical adhesives (5) |
2N0055 |
Raw materials (27) |
2N0060 |
Technical ceramics (1) |
Services to industry
2P0005 |
Audit, Expertise, Consulting (27) |
2P0010 |
Communication, marketing (4) |
2P0015 |
Machine diagnostics - vibratory analyses (5) |
2P0020 |
Banking and financial institutions (4) |
2P0030 |
Quality / Certification (2) |
2P0035 |
Human Resources (employment, recruitment, coaching,...) (3) |
2P0040 |
Strategy, Development, Organisation (11) |
Miscellaneous organisations
2R0005 |
Public administration and authorities (5) |
2R0010 |
Technology transfer centre (7) |
2R0015 |
Engineering college (1) |
2R0020 |
Business incubator (4) |
2R0025 |
Continuing education institute (2) |
2R0030 |
Research institute (1) |
2R0035 |
Research laboratory (1) |
2R0040 |
Technical high school |
2R0045 |
Industry or consular organisation (9) |
2R0050 |
Competitiveness cluster (5) |
2R0055 |
Business and professional press (7) |
2R0060 |
Business promotion (8) |
Miscellaneous
2S0005 |
Clothes / accessories clean room, and other (2) |
2S0010 |
Furniture and industrial workstations (3) |
MICRONORA - CS 62125 - 25052 Besançon Cedex - France
Tél. : +33 (0)3 81 52 17 35 - Fax : +33 (0)3 81 41 30 89
Email : contact@micronora.com - Web : https://www.micronora.com