Nomenclatureadmin2021-09-09T10:19:09+02:00
Micronora’s nomenclature consists of 2 sections:
- microtechnology subcontracting
- production technologies, trading and service providers
Machine tools and equipment
Conventional machine tools with stamping tools
2A0005 | Turning and milling centres |
2A0010 | Machining centres (with exchange of dies) |
2A0015 | Numerically controlled milling machines |
2A0020 | Knee and column milling machines (horizontal or vertical) |
2A0025 | Copying milling machines |
2A0030 | Tool milling machines |
2A0035 | Tapping machines |
2A0040 | PCB machining machines |
2A0045 | Drilling machines |
2A0050 | Sawing machines |
2A0055 | Numerically controlled lathes |
2A0060 | Turning lathes |
2A0065 | Toolmaker's lathes |
2A0070 | Parallel turning and threading lathes |
2A0075 | Machining units (drilling, milling, trimming, sawing) |
2A0080 | Gear hobbing machines |
Conventional abrasion machine tools
2B0005 | Drill bit grinding machines |
2B0010 | Milling tool grinding machines |
2B0015 | Lathe tool grinding machines |
2B0020 | Universal grinding machines |
2B0025 | Abrasion polishing and deburring machines (vibration tumbling) |
2B0030 | Abrasion polishing machines |
2B0035 | Numerically controlled grinding machines |
2B0040 | Cylindrical grinding machines (inner and outer) |
2B0045 | Surface grinding machines |
2B0050 | Cylindrical lapping machines |
Non-conventional metal removing machines
2C0005 | Laser-marking machines |
2C0010 | Etching machining machines |
2C0015 | Continuous laser machining machines |
2C0020 | Pulse laser machining machines |
2C0025 | Wire EDM machines |
2C0030 | EDM machines with tool magazines |
2C0035 | Die sinking EDM machines |
2C0040 | High precision abrasive waterjet cutting machines |
Machine tools for sheet metal working
2D0005 | Automatic sheet working lines |
2D0010 | Shearing lines (automatic and numerically controlled shearing) |
2D0015 | Punching lines |
2D0020 | Sheet planishing machines |
2D0025 | Slitting machines |
2D0030 | Swaging machines |
2D0035 | Numerically controlled punching machines |
2D0040 | High-speed presses |
2D0045 | Arch frame or column type presses |
2D0050 | Open-front presses |
2D0055 | Drawing presses (hydraulic) |
2D0060 | Drawing presses (mechanical) |
2D0065 | Revolving table presses |
2D0070 | Wire and strip bending presses |
2D0075 | Pneumatic and hydro-pneumatic presses |
2D0080 | Transfer presses |
2D0085 | Punching units |
Machine tools for injection
2E0005 | Plastic injection presses |
2E0010 | Injection presses for metals under pressure |
2E0015 | Thermocompression presses |
2E0020 | Low-pressure injection systems |
2E0105 | Accessories for injection machines |
2E0205 | 3D printers |
2F0005 | Special machines for automation and assembly |
2F0105 | Flexible assembly cells |
2F0110 | Wire-guided trucks |
2F0115 | Conveyors |
2F0120 | Gluing machines |
2F0125 | Welding machines |
2F0130 | Screwdriving machines |
2F0135 | Assembly machines |
2F0140 | Automatic assembly machines |
2F0145 | Assembly micromachines |
2F0150 | Industrial robots |
2F0155 | Free transfers |
2F0160 | Linear transfers |
2F0165 | Rotary transfers |
2G0005 | Measuring and inspecting machines, instruments and equipment |
2G0105 | Optical alignment |
2G0110 | Temperature measurement equipment |
2G0115 | Dimensional metrology equipment |
2G0120 | Electrical / electronic / magnetic metrology equipment |
2G0125 | Testing systems |
2G0130 | Dimension visualisation equipment |
2G0135 | Three-dimensional measuring machines |
2G0140 | Non-destructive testing machines and equipment |
2G0145 | Profile projectors and optical measuring machines |
2H0005 | Thermo-chemical treatment machines and equipment (ovens) |
Surface treatment machines
2I0005 | Electrolysis baths |
2I0010 | Cleaning machines (pickling, degreasing) |
2I0015 | Plasma cleaning |
2I0020 | Dust removal - antistatic |
2I0025 | Ultrasonic cleaning |
Other equipment
2J0005 | Soundproofing booths and equipment |
2J0010 | Air compressors |
2J0015 | Equipment for workstation environment |
2J0020 | Equipment for the environment and water treatment |
2J0025 | Centrifuges for parts, chips, stamping liquid |
2J0030 | Machines and materials for packing and packaging |
2J0035 | Induction heating machine or equipment |
Trade and industrial supplies
Accessories for tools (stamping/moulding)
2K0005 | Accessories for tools (stamping) |
2K0010 | Accessories for tools (moulding) |
2K0105 | Accessories for column type units: punches, dies etc. |
2K0110 | Units with plain columns and plates |
2K0115 | Standard components for moulds |
2K0120 | Standard components for stamping/forming tools |
2K0125 | SMED systems |
2K0130 | Tool measuring and counting systems |
2K0135 | Guiding systems for tools and moulds |
2K0140 | Tapping units |
2K0145 | Automatic insertion and/or crimping units |
2K0150 | Cylinders, springs |
Components and modules
2L0005 | Micromechanical components and modules |
2L0105 | Clamping units |
2L0110 | Standard components (screws, pins etc.) |
2L0115 | Counting systems |
2L0120 | Special screwing systems |
2L0125 | Guiding elements |
2L0130 | Fasteners and Fastone |
2L0135 | Programmers |
2L0140 | Springs |
2L0145 | Bearings |
2L0205 | Microelectronic components and modules |
2L0305 | Electronic actuators |
2L0310 | Electronic sensors |
2L0315 | Printed Circuits |
2L0320 | Electronic connectors |
2L0325 | Brazing/soldering equipment |
2L0330 | Micromotors |
2L0335 | Microswitches |
2L0340 | Monitors |
2L0345 | Electrical motors |
2L0350 | Relays |
2L0355 | Electric sequencers |
2L0405 | Optical components and modules |
2L0505 | Optical actuators |
2L0510 | Optical displays |
2L0515 | Optical benches |
2L0520 | Optical sensors, receivers, transmitters |
2L0525 | Optical encoders |
2L0530 | Optical fibres |
2L0535 | Lasers |
2L0540 | Lenses |
2L0605 | Pneumatic and hydraulic components and modules |
2L0705 | Actuators |
2L0710 | Connectors unions |
2L0715 | Valves |
2L0720 | Filters |
2L0725 | Motors |
2L0730 | Sequencers |
2L0735 | Tubes and other accessories |
2L0740 | Cylinders |
Equipment and tooling
2M0005 | Machines accessories |
2M0105 | Automatic feed systems, distributors for presses and shears |
2M0110 | Vibration absorbers |
2M0115 | Gas cleaning equipment / wet vacuums |
2M0120 | Automatic loading and unloading arms |
2M0125 | Automatic loaders, vibration systems |
2M0130 | Decoilers for wires and strips |
2M0135 | Single and multiple-spindle tapping systems |
2M0140 | Feeding and ejection systems |
2M0145 | Greasing and lubrication systems |
2M0150 | Protective and safety systems |
2M0155 | Grinding systems |
2M0160 | Volumetric metering systems |
2M0165 | Winding, unwinding, straightening equipment |
2M0170 | Numerical control equipment |
2M0175 | Vices |
2M0180 | Miscellaneous expansion mandrels |
2M0185 | Machining assemblies and templates |
2M0190 | Clamps |
2M0195 | Pneumatic circular tables |
2M0200 | Dividing tables, indexing tables |
2M0205 | Icing plates |
2M0210 | Magnetic tables |
2M0215 | Points |
2M0220 | Tool holders |
2M0225 | Remonte-copeaux et pièces magnétisables |
2M0230 | Boring, grinding, surfacing heads |
2M0235 | Drawing and stamping transfer systems |
2M0240 | Part sorting with bowl feeders |
2M0305 | Cutting tools |
2M0405 | Diamond files |
2M0410 | Grinding instruments and abrasive bands |
2M0415 | Boring tools |
2M0420 | Threading tools |
2M0425 | Milling tools |
2M0430 | Drilling tools |
2M0435 | Sawing tools |
2M0440 | Trimming tools |
2M0445 | Turning tools |
2M0450 | High-speed machining tools |
2M0455 | Plastic packaging for cutting tools or mechanical parts |
2M0505 | EDM tools |
2M0605 | Electrodes (for EDM) |
2M0610 | Wires (for EDM) |
2M0615 | Parts supports (for EDM) |
2M0620 | Electrode holding systems (for EDM) |
2M0625 | Parts transfer systems (for EDM) |
Robotics and automation peripherals
2M0705 | Robot accessories |
2M0710 | Accessories for industrial data processing |
2M0715 | Driving and transfer modules |
2M0720 | Computers, calculators and PLCs |
Materials and semi-worked products
2N0005 | Industrial glues |
2N0010 | Mouldings, castings, sinterings |
2N0015 | Composite materials |
2N0020 | Consumable materials (lubricants, stamping fluid, treatment chemicals etc.) |
2N0025 | Low pressure plastics, bi-components |
2N0030 | Raw materials and semi-worked products for stamping and drawing applications |
2N0035 | Raw materials and semi-worked products for plastics technology applications |
2N0040 | Nanomaterials / nanopowders |
2N0045 | Paints |
2N0050 | Technical adhesives |
2N0055 | Raw materials |
2N0060 | Technical ceramics |
Services to industry
2P0005 | Audit, Expertise, Consulting |
2P0010 | Communication, marketing |
2P0015 | Machine diagnostics - vibratory analyses |
2P0020 | Banking and financial institutions |
2P0025 | Training |
2P0030 | Quality / Certification |
2P0035 | Human Resources (employment, recruitment, coaching,...) |
2P0040 | Strategy, Development, Organisation |
Miscellaneous organisations
2R0005 | Public administration and authorities |
2R0010 | Technology transfer centre |
2R0015 | Engineering college |
2R0020 | Business incubator |
2R0025 | Continuing education institute |
2R0030 | Research institute |
2R0035 | Research laboratory |
2R0040 | Technical high school |
2R0045 | Industry or consular organisation |
2R0050 | Competitiveness cluster |
2R0055 | Business and professional press |
2R0060 | Business promotion |
2R0065 | University |
Miscellaneous
2S0005 | Clothes / accessories clean room, and other |
2S0010 | Furniture and industrial workstations |